EPHA Hose Protectors are tough, abrasion-resistant shields that withstand solvents, oils, grease, and gasoline. With a high wear factor and a wide operating temperature range (-40° to 430°F), they safeguard equipment in harsh conditions.
| SKU |
Protector Size (W x L) |
Qty |
Cable Tie Required to Install (not included) |
| HP4B/1 |
2.5" x 4" |
1 x 4" Hose Protector |
3 x (8" x 50lb) |
| HP6B/1 |
3.25" x 6" |
1 x 6" Hose Protector |
3 x (12" x 50lb) |
| HP8B/1 |
3.5" x 8" |
1 x 8" Hose Protector |
3 x (12" x 50lb) |
| HP10B/1 |
4.5" x 10" |
1 x 10" Hose Protector |
4 x (14" x 120lb) |
| HP12B/1 |
5" x 12" |
1 x 12" Hose Protector |
4 x (14" x 120lb) |
Protects Against
• Hose and wiring abrasion caused by points of contact
• Expensive hose and wiring repair bills
• Fires caused by failed oil & electrical systems
• Lost profits from costly down time
• DEQ oil spills & clean-up
Product Features
• Extremely high wear factor
• Wide operating temperature range (-40˚ to 430˚ F) provides protection in a variety of applications
• Impervious to solvents, oils, grease, gasoline, etc.
• Easy installation in minutes
• Exceptionally cost-effective
• Available in 5 sizes – 4”, 6”, 8”, 10” and 12”
• Every order shipped in counter display boxes
Installing an EPHA Hose Protector is a quick and effective way to shield hoses from abrasion, whether during assembly or replacement. There's no need to disassemble lines or disrupt hydraulic systems, making it a versatile solution for spot applications.
- Identify the problem area on the hose.
- Position the Hose Protector over the affected section.
- Secure with cable ties, tightening them with pliers.
- Trim the excess tie length—your hose is now protected from wear!
